Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
Uline 3M8672 4X36YDS POLYURETHANE TP
3M8672 4INX36YDS POLYURETHANE TP Tape and Adhesives 2 rolls/case
Accuflow Systems TPE Tubing
Purity One™ OneFlex Biopharmaceutical grade TPE tubing has been formulated for demanding and critical fluid transfer applications in Biopharmaceutical processing. OneFlex is an excellent choice for applications that require heat sealing and sterile welding capabilities, and also can be molded for single-use assemblies such as bottle top inserts. Purity One OneFlex is an excellent choice for applications such as sampling, aseptic welding, aseptic sealing, filtration, and sterile filling and transfer. Full validation guide and USP <665> Extractables testing available.
Accuflow Systems C-Flex Tubing, Saint Gobain, 374, TPE, thermoplastic elastomer, weldable, 50ft
C-Flex Tubing, Saint Gobain, 374, TPE, thermoplastic elastomer, weldable, 50ft
AVANTOR MASTERFLEX (VWR LLC) Masterflex B/T PerfectPosition™ Pump Tubing, PharmaPure, B/T 91; 10 ft
Tubing Mflex Pharmapur #91 10'
BURKLE INC PE hose, inner-x outer-Ø 0.24x0.31 in. (6x8 mm), 32.81 ft. (10m)
The PE hose is characterized by its robustness and reliability. It is suitable for high operating requirements with less flexibility and can be used for pressure applications. It is made of high-quality polyethylene, which gives it excellent resistance to (non-oxidizing) acids, alkalis, salts and a variety of solvents. The hose is very light and dimensionally stable up to + 80 °C. PE hoses have good transparency for optimum visual inspection and have excellent odor and taste neutrality properties.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Tygon 3370 I.B. Reinforced Platinum-Cured Silicone, 3/8"" ID x 5/8"" OD; 50 ft
Formulation: Tygon 3370 I. B., silicone, platinum cured. Applications: Demanding sanitary high-pressure pharmaceutical, biotechnology, food and beverage, and cosmetic applications. Characteristics: Excellent heat resistance, low compression set, odorless, and nontoxic. Translucent. Certification: Elastomer is FDA-compliant (21 CFR 177.2600) and USP Class V extractables; exceeds Class VI implant; exceeds 3A Sanitary Standards; produced to Bulk Pharmaceutical cGMPs (FDA 21 CFR 210, 211). Tubing manufactured according to GMP Temperature range: ¿60 to 320¿F (¿51 to 160¿C) Sterilize: With autoclave, ethylene oxide, or gamma irradiation.
Accuflow Systems C-Flex Tubing, Saint Gobain, 374, TPE, thermoplastic elastomer, weldable, 50ft
C-Flex Tubing, Saint Gobain, 374, TPE, thermoplastic elastomer, weldable, 50ft
Accuflow Systems C-Flex Tubing, Saint Gobain, 374, TPE, thermoplastic elastomer, weldable, 50ft
C-Flex Tubing, Saint Gobain, 374, TPE, thermoplastic elastomer, weldable, 50ft
AVANTOR MASTERFLEX (VWR LLC) TUBING MFLEX TYGONCHEM 17 50FT
Masterflex L/S Precision Pump Tubing, Versilon™ 2001 Tubing, L/S 17; 50 ft, Avantor
AVANTOR MASTERFLEX (VWR LLC) TBING MFLEX E-FOOD NO 87 10FT
Masterflex B/T PerfectPosition Pump Tubing, Tygon E-Food, B/T 87; 10 ft, Avantor
AVANTOR MASTERFLEX (VWR LLC) TUBING TYGON 2-STOP 14 8/PK
Masterflex L/S 2-Stop Precision Pump Tubing, Tygon S3™ E-LFL, L/S 14; 8/PK, Avantor
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, PFA, 1/32"" ID x 1/16"" OD; 25 ft
Applications: Demanding lab, chemical, electrical, mechanical, pharmaceutical, and automotive applications. For the transfer of high-temperature or highly corrosive materials. Also good for high-purity work. Characteristics: Chemically inert, nontoxic, and virtually nonporous. Excellent crack- and stress-resistance. Low coefficient of friction. Translucent. Resin certification: Resin is FDA-compliant (21 CFR 177.1550); meets USP Class VI requirements. Tubing is manufactured according to GMP. Temperature range: -320 to 500¿F (-195 to 260¿C) Sterilize: Autoclave, ethylene oxide, or use dry heat.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, PTFE, 3/8 ""x 1/2"" OD; 25 ft
Applications: Demanding lab, chemical, electrical, mechanical, pharmaceutical, and automotive applications. Good for high-purity work. PTFE tubing withstands extreme temperatures. Characteristics: Chemically inert, nontoxic, and virtually nonporous. Excellent crack- and stress-resistance. Low coefficient of friction. Translucent. Certification: Resin is FDA-compliant (21 CFR 177.1550) Temperature range: -400 to 500¿F (-240 to 260¿C) Sterilize: Autoclave, ethylene oxide, or dry heat.
AVANTOR MASTERFLEX (VWR LLC) 2-STP TYGN E-LFL 0.25MMID 12PK
Masterflex Ismatec Pump Tubing, 2-Stop, Tygon S3™ E-LFL, 0.25 mm ID; 12/PK, Avantor
